{"id":955,"date":"2022-07-05T15:30:12","date_gmt":"2022-07-05T13:30:12","guid":{"rendered":"https:\/\/www.isoflanges.de\/?page_id=955"},"modified":"2025-08-13T15:22:15","modified_gmt":"2025-08-13T13:22:15","slug":"hp2-and-hq2-variants","status":"publish","type":"page","link":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/","title":{"rendered":"HP2 AND HQ2 Variants"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Nahaufnahme\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

HP2 AND HQ2 VARIANTS<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The HP2* insulating flange design utilises the largest possible contact area on the weld neck flange face by means of insulating rings and thrust rings; as a result, the corrugated gaskets are compressed evenly. A pad flange connection can be achieved through the additional use of compensation plates between the insulating flange and the weld neck flanges. This enables maximum bolt tension and thereby a high bolt preload.
All variants are available in D and Dplus outside diameters.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tInstallation instruction HP2<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tInstallation instruction HQ2<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tOperating instructions HP2<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tOperating instructions HQ2<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

* (patented by Lannewehr + Thomsen GmbH & Co.KG)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Variant: HP2* (High Performance)<\/strong><\/p>

  • High mechanical strength thanks to the compact construction<\/li>
  • Thrust rings<\/li>
  • Insulating rings<\/li>
  • Metal-to-metal contact seals<\/li>
  • Additional extra: compensation ring<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Pad flange connection<\/strong><\/p>

    • High torsional rigidity<\/li>
    • Utilisation of largest possible contact area<\/li>
    • Maximum screw tension<\/li>
    • Maximum operational reliability<\/li>
    • Maximum seal durability<\/li>
    • Minimal inspection and maintenance requirement<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Variant: HQ2<\/strong><\/p>

      • Conventional construction<\/li>
      • Steel washers<\/li>
      • ISO washers<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        TECHNICAL DATA AND DRAWINGS<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        A functioning CP system requires reliable separation of the CP-protected pipeline by means of insulating joints.<\/p>

        We offer various different designs:<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Querschnittsdarstellung\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Insulating flange DIN, type HP2*<\/strong><\/p>

        • Assembly example with cable lug<\/li>
        • Flange compensation ring<\/li>
        • Thrust ring<\/li>
        • Insulating ring<\/li>
        • Seal<\/li><\/ul>

          * (patented by Lannewehr + Thomsen GmbH & Co.KG)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Querschnittsdarstellung\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          Insulating flange ASME, type HP2* for RTJ flanges<\/strong><\/p>

          • Assembly example with cable lug<\/li>
          • Flange compensation ring<\/li>
          • Thrust ring<\/li>
          • Insulating ring<\/li>
          • Seal<\/li><\/ul>

            * (patented by Lannewehr + Thomsen GmbH & Co.KG)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Querschnittsdarstellung\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            Insulating flange HP2* for water<\/strong><\/p>

            • Technically tight in the long term<\/li>
            • Mechanically maintenance-free<\/li>
            • Weld neck flange sealing area modified<\/li>
            • Inner coating ends on the undercut<\/li>
            • O-ring seals (NBR70)<\/li>
            • Lip seal (EPDM)\/insulating flange<\/li>
            • Pad flange connection = high level of resistance against pipe forces that occur<\/li><\/ul>

              * (patented by Lannewehr + Thomsen GmbH & Co.KG)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Querschnittsdarstellung\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              Insulating flange DIN, type HQ2<\/strong><\/p>

              • Bolts with nuts<\/li>
              • Insulating bolts<\/li>
              • Steel washer<\/li>
              • ISO washer<\/li>
              • Seal<\/li>
              • Insulating flange<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Farbige\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t

                Insulating flange ASME, type HQ2 for RTJ flanges<\/strong><\/p>

                • Bolts with nuts<\/li>
                • Insulating bolts<\/li>
                • Steel washer<\/li>
                • ISO washer<\/li>
                • Soft iron sealing ring<\/li>
                • Insulating flange<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Querschnittsdarstellung\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t
                  \n\t\t\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t

                  Insulating flange DIN, type HQ2 for recessed flanges<\/strong><\/p>

                  • Bolts with nuts<\/li>
                  • Insulating bolts<\/li>
                  • Steel washer<\/li>
                  • ISO washer<\/li>
                  • Seal<\/li>
                  • Insulating flange<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

                    HP2 AND HQ2 VARIANTS The HP2* insulating flange design utilises the largest possible contact area on the weld neck flange face by means of insulating rings and thrust rings; as a result, the corrugated gaskets are compressed evenly. A pad flange connection can be achieved through the additional use of compensation plates between the insulating […]<\/p>\n","protected":false},"author":4,"featured_media":0,"parent":948,"menu_order":10,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-955","page","type-page","status-publish","hentry"],"yoast_head":"\nInsulated flange connection Design variants HP2 and HQ2<\/title>\n<meta name=\"description\" content=\"The HP2 insulating flange design utilizes the maximum possible contact surface on the weld-on flange plate, thereby ...\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Insulated flange connection Design variants HP2 and HQ2\" \/>\n<meta property=\"og:description\" content=\"The HP2 insulating flange design utilizes the maximum possible contact surface on the weld-on flange plate, thereby ...\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/\" \/>\n<meta property=\"og:site_name\" content=\"ISOflanges: high-quality flange connections\" \/>\n<meta property=\"article:modified_time\" content=\"2025-08-13T13:22:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2024\/01\/220816_11_2-Isolierflansch-bei-der-Druckprobe_head_300-1.jpg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"4 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Insulated flange connection Design variants HP2 and HQ2","description":"The HP2 insulating flange design utilizes the maximum possible contact surface on the weld-on flange plate, thereby ...","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/","og_locale":"en_US","og_type":"article","og_title":"Insulated flange connection Design variants HP2 and HQ2","og_description":"The HP2 insulating flange design utilizes the maximum possible contact surface on the weld-on flange plate, thereby ...","og_url":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/","og_site_name":"ISOflanges: high-quality flange connections","article_modified_time":"2025-08-13T13:22:15+00:00","og_image":[{"url":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2024\/01\/220816_11_2-Isolierflansch-bei-der-Druckprobe_head_300-1.jpg","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/","url":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/","name":"Insulated flange connection Design variants HP2 and HQ2","isPartOf":{"@id":"https:\/\/www.isoflanges.de\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/#primaryimage"},"image":{"@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/#primaryimage"},"thumbnailUrl":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2024\/01\/220816_11_2-Isolierflansch-bei-der-Druckprobe_head_300-1.jpg","datePublished":"2022-07-05T13:30:12+00:00","dateModified":"2025-08-13T13:22:15+00:00","description":"The HP2 insulating flange design utilizes the maximum possible contact surface on the weld-on flange plate, thereby ...","breadcrumb":{"@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/#primaryimage","url":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2024\/01\/220816_11_2-Isolierflansch-bei-der-Druckprobe_head_300-1.jpg","contentUrl":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2024\/01\/220816_11_2-Isolierflansch-bei-der-Druckprobe_head_300-1.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/www.isoflanges.de\/en\/insulation-flanges\/hp2-and-hq2-variants\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/www.isoflanges.de\/en\/"},{"@type":"ListItem","position":2,"name":"InsulatingFlanges","item":"https:\/\/www.isoflanges.de\/en\/isolierflanschverbindungen\/"},{"@type":"ListItem","position":3,"name":"HP2 AND HQ2 Variants"}]},{"@type":"WebSite","@id":"https:\/\/www.isoflanges.de\/en\/#website","url":"https:\/\/www.isoflanges.de\/en\/","name":"ISOflanges","description":"Manufacturer of high-quality flange connections","publisher":{"@id":"https:\/\/www.isoflanges.de\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.isoflanges.de\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.isoflanges.de\/en\/#organization","name":"ISOflanges","url":"https:\/\/www.isoflanges.de\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.isoflanges.de\/en\/#\/schema\/logo\/image\/","url":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2022\/07\/isoflanges-logo.png","contentUrl":"https:\/\/www.isoflanges.de\/wp-content\/uploads\/2022\/07\/isoflanges-logo.png","width":138,"height":89,"caption":"ISOflanges"},"image":{"@id":"https:\/\/www.isoflanges.de\/en\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/pages\/955","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/comments?post=955"}],"version-history":[{"count":61,"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/pages\/955\/revisions"}],"predecessor-version":[{"id":4262,"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/pages\/955\/revisions\/4262"}],"up":[{"embeddable":true,"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/pages\/948"}],"wp:attachment":[{"href":"https:\/\/www.isoflanges.de\/en\/wp-json\/wp\/v2\/media?parent=955"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}